MUST HAVE AT LEAST 4 INCHES OF LIFT TO USE THIS LONG ARM KIT
Designed to be used from 4" to 12" of lift.
No welding required minor drilling only.
The Dodge Ram long kit allows for adjustments to a caster angle and axle centering in fender wells. When running a lift the axle is no longer centered in the fender like stock. Adjustable control arms allow you to center axle back to stock location which helps to reduce or stop tire rubbing when turning. The long arm kit lower control arms still utilize factory cam bolt style adjustments for easier alignment angle adjustments.
Apoc Dodge Ram long arm conversion kits are a great upgrade from stock. Factory control arms work great with factory sized tires and suspension but once you go bigger you need stronger and longer controls arms to maintain correct handling. Apoc long arm kits are built to maintain proper suspension and steering geometry to keep your truck feeling like stock but better. When adding any amount of lift to a Dodge Ram you change your caster angles which can create dangerous steering symptoms making it hard to control on the road. Big tires and big lifts look great but don't sacrifice handling and create a beast to keep on the road. Upgrade you control arms and drive with ease. Dodge Ram long arm kits are fully adjustable from 4 inches of lift all the way to 10" of lift, so if your just starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.
- 2 Upper Control Arms DOM
- 2 Lower Control Arms DOM
- Long arm Conversion Bracket
- Top Quality Polyurethane Bushings
- Bushing Ends DOM Tubing
- Grease Fitting For Each Bushing For Long Life
- 6-8 Hours
- Basic hand tools
- Jack and Jack stands
Control Arm lengths
If you are upgrading from factory control arms make sure you set the length to the correct lift size to keep your steering geometry correct. The larger the lift the longer the control arms. Don't assume what your lift size is, if you are not sure contact the lift kit manufacture to verify your lift size. The Instructions will give you the measurements to set each control arm to match your lift, an alignment is recommended after install to insure all alignment angle are proper.