Part came fast good quality and exact fit
2009-2022 Dodge Ram 1500 Rear Adjustable Track Panhard Bar with Flex Joint
The adjustable track bar is a very important part for a lifted straight axle vehicle. The track bar is used to center your axle from left to right, if the length is not correct for your lift, you can create major alignment issues like dog tracking, brake pull, and the infamous death wobble. If you are running a pitman arm drop, you should also have a track bar drop bracket to keep angles correct and help with preventing the death wobble. When lifting your vehicle any more than 2” with out a track bar drop bracket, your track bar might need to be upgraded to an adjustable track bar to correct the alignment issues. If the track bar drop back is not dead on for your lift size, you might not be able to get the axle properly centered, that is when the adjustable track bar should be used with the drop bracket to correct the issue.
SPECS:
- 1.5" solid rod construction
- Adjustable for lifts up to 10"
- Precision machined bushing end
- Rebuildable polyurethane bushings
- 1" threaded flex joint
- powder coated
- Made in the USA!
Install Time:
- 1-1.5 Hours
- Method to support the vehicle weight off of the axle.
- Basic hand tools and tape measure.
2009-2022 Dodge Ram 1500 Rear Adjustable Track Panhard Bar with Flex Joint
Sale price$ 326.94
Customer Reviews
Overall rating: 4.8 / 5 from 6 reviews.
Very well, Bill thank you very much💯💯
2009-2022 Dodge Ram 1500 Rear Adjustable Track Panhard Bar with Flex Joint
I just want to say thanks for the great product at this time I have not installed it yet I'm sure it's going to be great I hope I can get pictures to you after I have it done I'm very impressed with this with the product I have no doubt that it's going to be nice it's going to make a difference with the ride
I made a great choice
The product is good so far. The only problem I have is I Pais extra for new hardware and the new hardware did not work. The bolts were too short and two of the bolts that were sent were not for my truck so I couldn't use any of it. I ended up having to use the original hardware that came off the old control arms. As for the control arms themselves the seem sturdy but I haven't been able to put them to the test as of yet.
Great quality and build. Love having the flexibility to adjust and fine tune my driveline. A must if you do mods to your height.