


BLADE 20X10 6X135/5.5 106 -18 G-BLK-MILL
Fuel BLADE FC889 20x10 Wheel | Gloss Black Milled
Give your build a sharper edge with the Fuel BLADE FC889. Its deep concave profile and sharp 16-spoke geometry create a focused, aggressive look without relying on a busy design. This exact 20x10 configuration combines a Gloss Black Milled finish with 6x135/6x139.7 mm mounting and -18 mm offset.
Gloss Black Milled adds contrasting details to the BLADE’s sharply defined geometry. Match the full part number, FC889BE20106718N, to keep the finish, size, and mounting configuration aligned with your build plan.
Exact Wheel Specifications
- Part number: FC889BE20106718N
- Model: Fuel BLADE FC889
- Finish: Gloss Black Milled
- Wheel size: 20x10 inches
- Bolt patterns: 6x135/6x139.7 mm
- Offset: -18 mm
- Center bore: 106.10 mm
- Backspacing: 4.79 inches
- Wheel weight: 39.24 lbs
- Manufacturer cap reference: 1008A63GB
Dual-drilled configuration: Fuel lists 6x135/6x139.7 mm for this exact part. These are two separate bolt patterns, not an interchangeable range. Verify that one matches your vehicle’s hub.
Plan Your Fitment
The negative-offset configuration needs particular attention to tire position and outer fender clearance. Compare both width and offset with your current wheels before choosing a tire size. Confirm bolt pattern, center bore, brake-caliper clearance, wheel load requirements, tire size, and suspension and fender clearance for your exact vehicle. A matching bolt pattern alone does not establish compatibility. Lift, leveling, trimming, or spacer requirements depend on the full wheel-and-tire setup; no specific vehicle fit or rub-free result is promised.
Before Installation
Test-fit wheels before mounting tires. Confirm lug hardware and seating style, hub-ring requirements, and TPMS compatibility with your installer. The cap number is a manufacturer reference, not confirmation that caps or installation hardware are included.

