










2010-2013 Dodge Ram 2500 / 3500 4wd Adjustable Control Arms
APOC Adjustable Control Arms (2010–2013 Dodge Ram 2500/3500 4WD) – Heavy-Duty Suspension Upgrade
Upgrade your Dodge Ram with APOC Industries Adjustable Control Arms, built for lasting durability, precise alignment, and smooth, confident performance. Ideal for leveled and lifted 4WD trucks, these arms help correct caster and axle positioning for better handling, steering feel, and tire wear.
Key Features:
- Vehicle Fitment: Fits 2010–2013 Dodge Ram 2500 and 3500 4WD models
- Fully Adjustable: Restores correct caster and wheelbase alignment in lifted or leveled setups
- Heavy Wall Steel Tubing: Made from extra-thick wall steel for rugged, high-load strength
- Threaded Ends: Strong and simple adjustability for precise suspension tuning
- Zinc-Plated Hardware: Corrosion-resistant jam nuts and fittings for long-term use
- Polyurethane Bushings: Quiet, serviceable, and built to last — pre-installed for convenience
- Powder Coated Finish: Black powder coating guards against rust, salt, and road grime
Installation:
- Tools Required: Basic hand tools and torque wrench
- Install Time: Approx. 2–3 hours
- Difficulty: Moderate (professional alignment strongly recommended)
⚠️ Installation Note: Best paired with a post-install alignment to ensure correct caster and tire wear on leveled/lifted vehicles.
What’s Included:
- ✅ (2) Upper Adjustable Control Arms
- ✅ (2) Lower Adjustable Control Arms
- ✅ Polyurethane Bushings (pre-installed)
- ✅ Installation hardware is optional and sold separately

Built Right. Backed Right.
Our crew’s on call Monday–Friday, 9–5 EST. Hit us up at 865-983-5004 — real support, done right.
Product specifications
Fits factory brackets, no cutting required
Stock height upto 6" lift
PTMEG Polyurethane 91 Durometer
Yes, adjustable from stock to +2.5".
3/16" Thick steel
Powder Coated Satin Black


Strength. Adjustability. Confidence.
Dodge Control Arm asse
Built for Your Ram
What all comes with a Dodge control arm kits?
Complete Kit – Ready to Install:
Each kit comes as a full set of four control arms — including two upper arms and two lower arms — fully assembled and ready for installation. You can reuse your factory hardware for mounting, or upgrade to new hardware if it is included or added to your order. Our goal is to make your installation as smooth and hassle-free as possible.
Premium Bushings – Built for Life:
Apoc Industries backs our bushings with a Lifetime Warranty for lasting confidence. We use only the highest quality polyurethane (PTMEG-based) in all Apoc products.
PTMEG polyurethane offers superior articulation and a firmer, more responsive feel — without the harshness commonly found in solid joints like heims or flex joints.
These bushings are ideal for daily driving while providing excellent durability and performance for moderate off-road use.
Adjustable Length for Precise Handling:
Apoc control arm kits are designed with flexibility in mind. They are stock length when fully collapsed and up to 2.5 inches longer when fully extended, giving you plenty of adjustability to fine-tune your truck’s suspension geometry and handling. Whether you’re leveling, lifting, or optimizing alignment, our arms provide the range needed for a perfect setup.
100%
Red, White & Built Right
Lifetime Warranty Polyurethane Bushings
Built to Last, Easy to Rebuild
Apoc Industries' high-performance polyurethane bushings are backed by a lifetime warranty and engineered for durability you can count on. Easily rebuildable with basic tools, they deliver a firm, responsive ride without the hassle—made for daily drivers and built for the long haul.

Before

After
FAQ'S
Dodge Adjustable control Arms
Our customer support is available Monday to Friday: 9am-5pm EST. 865-983-5004
Yes, adjusting caster absolutely helps on a leveled truck.
When you level a truck — even by just 1–3 inches — you're altering the front suspension geometry. This often reduces the factory caster angle, which can lead to issues like wandering, loose steering feel, or uneven tire wear. Restoring or slightly increasing caster after leveling improves steering stability, road tracking, and overall handling.
In many cases, trucks that are leveled benefit from:
- Caster correction bolts or cams
- Adjustable upper or lower control arms(especially on solid axle trucks)
- Professional alignment with attention to caster settings
Bottom line: Even a mild leveling kit can throw off alignment specs enough that caster correction is worth addressing — especially if you want the truck to feel planted and drive straight.
At Apoc Industries, we understand that every suspension change impacts your vehicle’s geometry. That’s why we provide detailed installation instructions, including caster correction measurements tailored to a variety of lift and leveling heights. Whether you’re adding a small leveling kit or a full suspension lift, our guides ensure you have the correct specifications to dial in your alignment for maximum drivability, tire life, and performance.
Taking the guesswork out of your setup means better results — and a better ride..
Yes, you can continue using your factory alignment bolt. Its eccentric design allows for easy fine-tuning of caster angles once the control arms are set to the correct length. This ensures a smooth and precise alignment process, whether you’re adjusting it yourself or having it dialed in by a professional shop.
Our components are engineered to work seamlessly with your existing hardware, saving you time and keeping installation straightforward.
For PTMEG (polytetramethylene ether glycol) polyurethane bushings, the best grease is a silicone-based lubricant with PTFE (polytetrafluoroethylene) additives. Here’s why and what to consider:
Why Silicone-Based with PTFE?
: PTMEG polyurethane is resistant to petroleum-based products, but silicone-based grease is preferred as it won’t degrade the material and is explicitly recommended for polyurethane bushings.Tackiness
: PTFE additives lower the coefficient of friction and are waterproof, ensuring long-lasting lubrication and quiet operation.
: Silicone-based grease repels water, protecting bushings from corrosion and maintaining performance in wet conditions.

Lifetime Warranty
Custom Polyurethane Bushings
Built for performance and practicality, our custom polyurethane bushings deliver a firmer, more responsive suspension feel while still allowing enough flex for a comfortable ride. Designed with DIY rebuilds in mind, these bushings can be easily serviced at home using basic hand tools—no press required. Durable, reliable, and user-friendly, they’re made to enhance handling and stand up to long-term use without sacrificing everyday drivability.
Serviceable 1/4"-28 Grease Zerks for Easy Maintenance
Our bushings are equipped with 1/4"-28 grease zerks for easy maintenance and long service life. These fittings are a common size, making them easy to service or replace with standard parts from any auto parts store. Designed for convenience, they allow quick re-greasing without disassembly to keep your suspension performing at its best.
Presicion Fit
Instead of using a one-size-fits-all approach, Apoc meticulously machines each arm to fit individual vehicles using precise tolerances and factory specifications. This guarantees a perfect and lasting fit, unlike other companies that rely on shims and generic components. Trust the expertise and quality of Apoc for your vehicle's needs.
Extra Thick tubing
Apoc opts for thick wall tubing, which is significantly stronger than stock and one of the toughest on the market.