2007-2017 Jeep Wrangler JK Front Adjustable Control Arms

2007-2017 Jeep Wrangler JK Front Adjustable Control Arms

$ 261.95

SKU: AP-900-606UA

Kit

Great reasons to buy from us:

Top Notch Customer service!
Need help! Give us a call or message us.
Lifetime Warranty
Lifetime warranty on all Apoc products.

Fits Stock to 5" Lifts

Apoc Jeep Wrangler JK adjustable controls arms are a significant upgrade from stock; factory controls arms work great with factory-sized tires and suspension. Still, once you go bigger, you need more robust and longer controls arms to maintain correct handling. Apoc Jeep Wrangler JK control arms are built to maintain proper suspension and steering geometry to keep your trig handling like stock but better. When adding any amount of lift to your Jeep Wrangler, you change your caster angles which can create dangerous steering symptoms and also causes your vehicle to wonder on the road. Big tires and lifts look great, but don't sacrifice handling, which can create a beast to keep on the street, upgrade your control arms and drive easily. Adjustable Controls arms are fully adjustable from stock to 5"of lift, so if you're starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.

Parts Included:

2 Upper Control Arms
2 Lower Control Arms
Top Quality Polyurethane Bushings
Bushing Ends DOM Tubing
Uses Factory Hardware
Grease Fitting For Each Bushing For Long Life

Install Time:

3-4 Hours
Basic hand tools
Jack and Jack stands

Arm lengths

these measurement are for 2.5"-3.5" with 5 degrees caster; these measurements are starting point and might need adjusted for proper alignment.

	Upper	Lower
Front	18 3/4"	23 1/16"
Rear	18 7/16"	20 7/16"

Control Arm lengths

If upgrading from factory control arms, ensure you set the length to the correct lift size to keep your steering geometry accurate. The larger the lift, the longer the control arms. Don't assume your lift size; if you are unsure, contact the lift kit manufacturer to verify your lift size. The Instructions will give you the measurements to set each control arm to match your lift; an alignment is recommended after installation to ensure all alignment angle are proper.