Easy install and didn’t have to cut anything out!
2015-2026 Ford F-150 Lowering Shackles Rear Drop Kit
2015–2026 Ford F-150 Rear Lowering Shackles | 1.5", 1.75", 2" Drop
The 2015–2026 F-150 sits with a slight factory rake — rear high, nose up — that looks ungainly at stock height and gets worse if you've leveled the front. The Apoc Industries Rear Lowering Shackles replace the factory rear leaf spring shackles with a shorter unit that drops the rear by 1.5", 1.75", or 2", preserving factory ride quality and full suspension travel.
Fits 2015–2026 Ford F-150 (2WD and 4WD). Built from 1/4" thick steel with replaceable polyurethane bushings and greaseable Zerk fittings. Built in the USA.
⚠️ Note: Rear bed support trimming is required for proper shackle clearance. Contact with the bed support may occur at full suspension droop (e.g., when lifted for service) but not at normal ride height.
Features
- Three Drop Options: 1.5", 1.75", or 2".
- 1/4" Thick Steel: Stronger than stock shackles and most competitor units.
- Replaceable Polyurethane Bushings: Reduces noise and vibration. Serviceable over the life of the shackle.
- Greaseable Zerk Fittings: Easy maintenance for long-term performance.
- Bolt-On Install: All required hardware included. No cutting or welding to the truck.
- Powder-Coated Finish.
- Fits 2WD and 4WD.
- USA-Made.
What's Included
- 2x rear lowering shackles
- Replaceable polyurethane bushings
- Installation hardware
Installation
- Est. Install Time: ~2 hours
- Tools Required: Basic hand tools, floor jack, jack stands
- Rear bed support trimming required for clearance — see instructions for specific trim location
- Alignment recommended after installation
Fitment
- 2015–2026 Ford F-150 (2WD and 4WD)
- Available drop heights: 1.5", 1.75", 2"
Further Reading
2015-2026 Ford F-150 Lowering Shackles Rear Drop Kit
Sale price€113,95
Built Right. Backed Right.
Our crew’s on call Monday–Friday, 9–5 EST. Hit us up at 865-983-5004 — real support, done right.
Product Specifications
Fitment
The rear bed support needs to be trimmed
Grease Fitiing
Yes 1/4-28 thread
Note
The rear bed support needs to be trimmed
Bushing Material
PTMEG Polyurethane
Finish
Satin Black Powder coat
Before/after
Showcase your product benefit by using before/after image comparison.
Before
After
Ford Lowering Shackles
Built for Your Ford
What's Included :
Apoc 2" Rear Lowering Shackle Kit (Ford F-150)
Everything you need for a clean, reliable install:
- (2) Heavy-Duty 2” Rear Lowering Shackles (Driver + Passenger side)
- Pre-installed Polyurethane Bushings
- Pre-installed Steel Inner Sleeves
- (1) Replacement Bolt for Rear Leaf Spring (for frame clearance applications)
- Installation Instructions (Printed or Digital PDF)
Note: Factory hardware is reused except for the included replacement rear bolt. No other bolts or nuts are necessary for proper install.
Note: Factory hardware is reused except for the included replacement rear bolt. No other bolts or nuts are necessary for proper install.
Premium Bushings – Built for Life:
Apoc Premium Polyurethane Bushings
Backed by a Lifetime Warranty, Apoc Premium Polyurethane Bushings are built to outlast and outperform—delivering long-term reliability, quiet operation, and zero-compromise performance in every shackle kit we build.
Our premium bushings are crafted from high-density polyurethane to outperform standard rubber in every category:
- Resists cracking, shrinking, and dry rot – holds up in all climates and under load
- Low-deflection design – improves suspension responsiveness without harshness
- Noise-free fit – precision-molded for a tight, rattle-free connection
- Grease-retaining channels – accepts PTFE-based bushing grease for smooth, long-term articulation
Like all Apoc components, our bushings are built for abuse but refined for street use—giving you a durable, quiet, and dependable ride whether you're hauling, cruising, or cornering.
Important Installation Fitment Note:
Clearance Note – Rear Bed Support Trimming
- Rear bed support trimming is required for proper shackle clearance on some models.
- Contact may occur only at full suspension drop, such as when the vehicle is lifted off the ground for service.
- At normal ride height, the shackle remains clear and does not interfere with the bed support.
Crafted Without Compromise
100%
Red, White & Built Right
Lifetime Warranty Polyurethane Bushings
Built to Last, Easy to Rebuild
Apoc Industries' high-performance polyurethane bushings are backed by a lifetime warranty and engineered for durability you can count on. Easily rebuildable with basic tools, they deliver a firm, responsive ride without the hassle—made for daily drivers and built for the long haul.
Before
After
FAQ'S
Ford Lowering Shackles
Our customer support is available Monday to Friday: 9am-5pm EST. 865-983-5004
Do Lowering Shackles Affect Ride Quality?
In most cases: No, not significantly.
Lowering shackles drop the rear of the truck by relocating the rear leaf spring mounting point—not by removing leaf springs or altering spring rates. This means the suspension system continues to function much like stock.
✅ Why Ride Quality Usually Stays the Same
- Leaf Spring Geometry Is Preserved: The springs still carry the load the same way—they’re just mounted higher relative to the frame.
- No Change to Spring Rate or Shocks: Since you’re not swapping springs or shocks (for mild drops), the ride feel remains largely OEM.
- Polyurethane Bushings: Help maintain quiet operation and reduce flex, improving long-term ride consistency.
⚠️ Situations Where Ride May Be Affected
🔸 Reduced Suspension Travel: A 2" drop brings the axle closer to the frame. If bump stops aren't adjusted, you may hit them sooner over large bumps.
🔸 Increased Axle Angle or Leaf Spring Arching: Rare, but possible if combined with other drop components or a flip kit.
🔸 Towing and Hauling: With less rake, trucks may appear to sag more under load. Suspension upgrades like helper bags may be needed for heavy-duty use.
💬 Summary
For 1"–2" lowering shackles, ride comfort remains nearly identical to factory, making them one of the easiest and cleanest ways to drop the rear of your truck without compromising everyday drivability.
⏱️ Installation Time for Lowering Shackles
For most vehicles—including the 2004–2014 Ford F-150—installing rear lowering shackles typically takes:
🕒 Estimated Install Time: 1 to 1.5 hours
🔧 Install Overview
- Skill Level: Beginner to moderate (depending on experience with suspension work)
- Tools Needed:
- No cutting, welding, or fabrication is required. This is a bolt-on installation using factory mounting points.
- Most installs are done with basic hand tools in a home garage.
💡 Pro Tips
- Loosen leaf spring bolts with the truck on the ground before lifting for easier access.
- Use a pry bar or lift the axle slightly to relieve tension when aligning the new shackles.
- Always torque bolts to factory specs once the vehicle is back on the ground under full weight.
Can I Use Factory Hardware?
Yes — most 2004–2014 F-150s can reuse factory bolts. On some trucks, one bolt per side may need to be cut due to frame clearance. However, many have successfully removed the bolt without cutting.
A replacement bolt is included.
Replace hardware if rusted, damaged, or upgrading finishes.
Always torque at ride height for proper bushing preload.
🛢️ What Type of Grease Should I Use in Polyurethane Bushings?
Using the correct grease is essential for maintaining quiet, smooth operation and extending the life of polyurethane bushings—especially in suspension components like lowering shackles.
✅ Recommended Grease: Synthetic Waterproof Grease with PTFE (Teflon)
This type of grease is specifically designed for polyurethane bushings. It creates a slick barrier between the bushing and sleeve, preventing noise, binding, and premature wear.
🔧 Key Features to Look For:
- 🟩 PTFE-Based or Silicone-Based – Both are bushing-safe and reduce friction
- 🟩 Waterproof & Non-Petroleum – Resists washout and won’t degrade polyurethane
- 🟩 Thick, Tacky Formula – Stays in place during articulation and suspension travel
- 🟩 Non-Reactive – Safe for all types of polyurethane and metal sleeves
⚠️ Avoid These:
- ❌ Petroleum-Based Grease (like standard lithium or chassis grease) – Can cause polyurethane to soften, swell, or degrade over time
- ❌ WD-40 or Spray Lubricants – Not a true lubricant and quickly evaporates
💡 Pro Tip
Apply a generous coat of grease inside the bushing bore and on the sleeve during installation. If your shackles include zerk (grease) fittings, pump fresh PTFE grease in every 6–12 months for best performance.
Customer Reviews
Overall rating: 4.8 / 5 from 57 reviews.
Thank you enjoy the experience
🤙🏻
easy to install, look great
well built and fit as they should, very nice american made product
Customer service was very communicative and even reached out to let me know about possible installation complications, that i assured them i could handle, and even actually called me to make sure they were shipping it to the right place, my address is in Canada (northern BC) and I said they shipped the same shackles to my friend in a smaller town in southern B.C. And he had no issues, so they went out of there way to contact me and make sure my address was correct and order going to the right place and wouldn’t be affected by tariffs/taxes/import fees aggressively, while doing it properly which I was willing to pay. Install was really straightforward and my brand new truck now has the stance/fitment I was going for!
Very easy install!
Great product, well built, relatively easy to install.
Fast delivery and easy to install…Very Happy with the truck stance.
Good quality easy to install
The 2in drop is just the right amount to make my 2023 F150 sit flat. The shackles run very close to the bed support’s but did not require cutting. The only reason they got 3 stars is because I had to reach out twice to check the status of the order that took almost 3 weeks. First time was out of stock and running another batch next week. The following week heard nothing so reached out once more and now the CNC was down for repairs.
Great product! 1.5” shackles dropped the truck to the perfect stance. Easy install, my instructions weren’t in the box but I was able to get them installed without a problem!
2015-2024 Ford F-150 Lowering Shackles | Adjustable Rear Drop Kit
Fast delivery good quality! Looks good gave my truck that even look with the front
Awesome customer service fast delivery my truck sits level now
2015-2024 Ford F-150 Lowering Shackles | Adjustable Rear Drop Kit
Shipping was quick easy to install took about 2 hours give it take
Went in ruff had to hammer them on clearance was slightly off
Install was a breeze. 30 minute job as described. Happy with the new lower stance the truck has. Thanks again.
Great look and feel. Way Better quality than your standard drop shackle
Part fit perfectly and I am happy about price and results. Took a little longer to get than I thought but end results are great. Professional part Thank you
The product is great, the customer service was good. I was not expecting how long it would take to get them though. Nearly 1 month. The customer service guy said they were backed up in production and it would be a few weeks. It would have been nice to know on their website how available the product was.
Fit a ford f150 2025 perfect!
Great product and customer service above and beyond! I had the rear suspension of my truck apart and due to a miscalculation on my part needed a component… tried every supplier in Canada with no luck, finally ended up talking to Bobby at Apoc who sent me a priority shipment which arrived in Canada the next day and that evening I had my truck back on the road! Thanks guys, so nice to talk to a real human being and deal with a company that takes pride in what they do!
Great customer service, quality parts. I’d buy from them again!
Great customer service.
Took about three weeks but it was worth it, called their number and got a couple updates and they ship fast! thanks guys!
Came out the way I wanted it too and looks amazing, would definitely recommend buying this item, apocino won’t fail you.
Good quality worth the wait!
Completely USA hand made 2” drop shackles. Fit was perfect at both ends. I also like that they included top bolts. This Made it about a 1/2 hour install since all you gotta do is cut off the bolt heads of the stock set up.
look good. haven't installed yet.
Good American made product, whoever I spoke to on the phone seemed nice
Gave my truck the perfect look ans great quality too
Thanks
Great product and made in America!
Easy to install! Great product
I put my order in, then I had to wait. I had no idea when I was going to receive my order. After calling customer service I was assured my order was coming but it was going to take a while. Sure enough it came in three days. Excellent craftsmanship and well worth the wait. Special thanks goes out to shorty.
Loved how simple it was to install! Makes the truck look perfect with altering the ride quality.
Nice quality and well made
Worked perfectly for my 23 single cab didn't even have to cut the bed for the 1.75 drop
took to long in delivery no shipping updates an wouldnt answer my emails, bad service
2” leave the back a little taller than the front but is the max drop before the need to cut the bed support. It shipped as scheduled and was exactly what I was expecting.