2008-2013 Dodge Ram 2500 / 3500 4wd Adjustable Track Panhard Bar

2008–2013 Dodge Ram 2500 / 3500 4WD Adjustable Track Bar (Panhard Bar) | Stock to 10" Lift

The track bar is what keeps your front axle centered left-to-right on a solid axle Ram. Lift the truck and the factory track bar angle goes wrong — your axle shifts toward the driver side, you get dog tracking, brake pull, and in serious cases, death wobble. No amount of alignment work fixes it without an adjustable bar. The Apoc Industries Adjustable Track Bar lets you re-center your axle precisely at any lift height from stock to 10".

Fits 2008–2013 Dodge Ram 2500 and 3500 4WD (solid front axle). Built in the USA.

Features

• 1.5" Solid Rod Construction: Significantly stronger than factory hollow tube — no flex under load or off-road.
• Adjustable to 10" Lift: Wide adjustment range covers mild leveling through full lift builds.
• Precision-Machined Bushing Ends: Tight tolerances for accurate axle centering.
• Rebuildable Polyurethane Bushings: Serviceable design — replace bushings without replacing the bar.
• Powder Coat Finish: Durable corrosion-resistant black coating.
• USA-Made: Built by Apoc Industries.

Specs

• Construction: 1.5" solid rod
• Bushing Type: Rebuildable polyurethane
• Lift Range: Stock to 10"
• Finish: Black powder coat
• Reference Measurement: 3" lift — center to center 39 1/8"

Installation

• Est. Install Time: 1–1.5 hours
• Tools Required: Basic hand tools, tape measure, method to support vehicle weight off the axle
• Measure and set bar length before installation to match your lift height
• If running a pitman arm drop, pair with a track bar drop bracket to maintain proper angles
• Alignment recommended after installation

Fitment

• 2008–2013 Dodge Ram 2500 / 3500 (4WD, solid front axle only)
• Lift Range: Stock to 10"
• Does NOT fit: 2WD models or 2003–2007 Ram 2500/3500

Complete Your Ram Build

• 2000–2009 Ram 2500/3500 Upper Adjustable Control Arms — correct caster and re-center your axle front-to-back
• 2010–2013 Ram 2500/3500 Lower Adjustable Control Arms — full geometry correction upper and lower
• 1994–2013 Ram CNC Long Arm Conversion Kit — full geometry fix for lifts over 6"
• Pinion Angle Explained