Fully adjustable from stock to 8" lift
Apoc Ram adjustable controls arms are a great upgrade from stock, factory controls arms work great with factory sized tires and suspension but once you go bigger you need stronger and longer controls arms to maintain correct handling. Apoc Ram control arms are built to allow proper rear pinion and driveshaft angles to insure your u-joints are happy and to control wheel hop under load. When adding any amount of lift to a Ram you change your drive line angles which can create premature U-Joint failure and drive line vibrations, adjustable rear control arms will help to reduce or eliminate these issues. Big tires and big lifts look great but don't sacrifice handling and reliability. Adjustable Controls arms are fully adjustable from stock all the way to 10" of lift, so if your just starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.
- 2 Upper Control Arms
- 2 Lower Control Arms
- Top Quality Polyurethane Bushings
- Double wall construction
- Bushing Ends .25 Wall DOM Tubing
- Uses Factory Hardware
- Grease Fitting For Each Bushing For Long Life
- 3-4 Hours
- Basic hand tools
- Jack and Jack stands
Control Arm lengths
If you are upgrading from factory control arms make sure you set the length to the correct lift size to keep your steering geometry correct. The larger the lift the longer the control arms. Don't assume what your lift size is, if you are not sure contact the lift kit manufacture to verify your lift size. The Instructions will give you the measurements to set each control arm to match your lift, an alignment is recommended after install to insure all alignment angle are proper.