865-983-5004
Great reasons to buy from us:
-
Free Shippping
Free shipping when you spend over $99 -
Top Notch Customer service!
Need help! Give us a call or message us. -
Lifetime Warranty
Lifetime warranty on all Apoc products.
Fits stock to 6" lifts
Double adjustable controls arm uses one right-hand thread and one left-hand thread on each control arm, allowing easy adjustments to a caster angle without removing the control arm. When running a leveling kit or more lift, the axle is no longer centered in the fender-like stock. Adjustable control arms allow you to center the axle back to the stock location, which helps to reduce or stop tire rubbing when turning.
Apoc Dodge Ram, adjustable control arms, is a significant upgrade from stock; factory controls components work great with factory-sized tires and suspension. Still, once you go bigger, you need more robust longer control arms to maintain correct handling. Apoc Dodge control arms are built to support proper suspension and steering geometry to keep your truck feeling like stock but better. When adding any amount of lift to a Dodge Ram, you change your caster angles which can create dangerous steering symptoms and make it harder to maintain proper wheel tracking, which can cause your vehicle to wander between the lines easier. Big tires and lifts look great, but don't sacrifice handling and create a beast to keep on the road. Upgrade your control arm and drive with ease. Adjustable Controls arms are fully adjustable from stock to 6 of lift, so if you're starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.
Parts Included:
- 2 Upper Control Arms
- 2 Lower Control Arms
- Top Quality Polyurethane Bushings
- Heavy Wall Tubing
- Bushing Ends DOM Tubing
- Uses Factory Hardware
- Grease Fitting For Each Bushing For Long Life
Install Time:
- 3-4 Hours
- Basic hand tools
- Jack and Jack stands
Control Arm lengths
If upgrading from factory control arms, set the length to the correct lift size to keep your steering geometry accurate. The larger the lift, the longer the control arms. Don't assume your lift size; if you are unsure, contact the lift kit manufacturer to verify your size. The Instructions will give you the measurements to set each control arm to match your lift; an alignment is recommended after installation to ensure proper alignment angles.
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1 business day. |
Description
Fits stock to 6" lifts
Double adjustable controls arm uses one right-hand thread and one left-hand thread on each control arm, allowing easy adjustments to a caster angle without removing the control arm. When running a leveling kit or more lift, the axle is no longer centered in the fender-like stock. Adjustable control arms allow you to center the axle back to the stock location, which helps to reduce or stop tire rubbing when turning.
Apoc Dodge Ram, adjustable control arms, is a significant upgrade from stock; factory controls components work great with factory-sized tires and suspension. Still, once you go bigger, you need more robust longer control arms to maintain correct handling. Apoc Dodge control arms are built to support proper suspension and steering geometry to keep your truck feeling like stock but better. When adding any amount of lift to a Dodge Ram, you change your caster angles which can create dangerous steering symptoms and make it harder to maintain proper wheel tracking, which can cause your vehicle to wander between the lines easier. Big tires and lifts look great, but don't sacrifice handling and create a beast to keep on the road. Upgrade your control arm and drive with ease. Adjustable Controls arms are fully adjustable from stock to 6 of lift, so if you're starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.
Parts Included:
- 2 Upper Control Arms
- 2 Lower Control Arms
- Top Quality Polyurethane Bushings
- Heavy Wall Tubing
- Bushing Ends DOM Tubing
- Uses Factory Hardware
- Grease Fitting For Each Bushing For Long Life
Install Time:
- 3-4 Hours
- Basic hand tools
- Jack and Jack stands
Control Arm lengths
If upgrading from factory control arms, set the length to the correct lift size to keep your steering geometry accurate. The larger the lift, the longer the control arms. Don't assume your lift size; if you are unsure, contact the lift kit manufacturer to verify your size. The Instructions will give you the measurements to set each control arm to match your lift; an alignment is recommended after installation to ensure proper alignment angles.
Fitment
Shipping
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1 business day. |
1973-1987 Chevrolet / GMC K10, K20 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/5/8" Main U-bolts
1980-1997 Ford F-250 / 350 Rear 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/Main U-bolts
1988-1998 Chevrolet / GMC C10 K10 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/Main U-bolts
1990-1995 Toyota 4 Runner 2nd gen Adjustable Trailing Arms
Hardware Kit/Adjustable Track Bar
1994-1999 Dodge Ram 1500 / 2500 / 3500 4wd HIGH Clearance Adjustable Control Arms
Hardware Kit With cam bolts
1994-1999 Dodge Ram 1500/ 2500 / 3500 4wd Long Arm Upgrade Kit
Hardware Kit for Axle side with Cam bolt.
1994-2002 Dodge Ram 2500 / 3500 Fabricated 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/9/16" Main U-bolts
1994-2013 Dodge Ram 1500/ 2500 / 3500 4wd CNC Long Arm Conversion upgrade Kit
Finish/Please choose your year range./Hardware Kit for Axle side with Cam bolt.
1994-2013 Dodge Ram 2500 / 3500 4WD FOX 2.0 Performance Series Shocks Front Pair
Front Lift
1973-1987 Chevrolet / GMC K10, K20 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/5/8" Main U-bolts
1980-1997 Ford F-250 / 350 Rear 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/Main U-bolts
1988-1998 Chevrolet / GMC C10 K10 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/Main U-bolts