865-983-5004
Great reasons to buy from us:
-
Top Notch Customer service!
Need help! Give us a call or message us. -
Lifetime Warranty
Lifetime warranty on all Apoc products.
Designed to be used on a 6-10 lift only, any less than 5" the axle will be pushed forward. Anything higher than a 10" lift axle will be pulled back towards the cab.
The Ram 2500 adjustable radius arm kit allows easy adjustments to a caster angle and axle centering in fender wells. When running a leveling kit or lift, the axle is no longer centered in the fender like stock. Adjustable radius arms allow you to center the axle back to the stock location, which helps to reduce or stop tire rubbing when turning. Apoc's radius arms are adjustable to allow for caster angle changes to correct steering geometry after installing a lift.
Apoc Ram 2500 Adjustable Radius arms are a significant upgrade from stock. Factory radius arms work great with factory-sized tires and suspension, but once you go bigger, you need more robust and longer control arms to maintain correct handling. Apoc adjustable radius supports proper suspension and steering geometry to keep your truck feeling like stock but better. When adding any amount of lift to a Ram 2500, you change your caster angles which can create dangerous steering symptoms and make it harder to maintain proper wheel tracking, which can cause your vehicle to wander between the lines easier. Big tires and lifts look great, but don't sacrifice handling and create a beast to keep on the road. Upgrade your control arms and drive with ease. Apoc Industries radius arms are fully adjustable from 2 inches of lift to 10" of lift, so if you're starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.
Parts Included:
- Two radius arms with DOM main tube for increased strength
- Alignment cam bolt for easy adjustments.
- Grease-able flex joint for long life.
Install Time:
- 3-4 Hours
- Basic hand tools
- Jack and Jack stand.
Radius Arm length
If upgrading from factory radius arms, ensure you set the length to the correct lift size to keep your steering geometry accurate. The larger the lift, the longer the control arms. Don't assume your lift size; if unsure, contact the lift kit manufacturer to verify your size. The Instructions will give you the measurements to set each control arm to match your lift; an alignment is recommended after installation to ensure proper alignment angles.
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1 business day. |
Description
Designed to be used on a 6-10 lift only, any less than 5" the axle will be pushed forward. Anything higher than a 10" lift axle will be pulled back towards the cab.
The Ram 2500 adjustable radius arm kit allows easy adjustments to a caster angle and axle centering in fender wells. When running a leveling kit or lift, the axle is no longer centered in the fender like stock. Adjustable radius arms allow you to center the axle back to the stock location, which helps to reduce or stop tire rubbing when turning. Apoc's radius arms are adjustable to allow for caster angle changes to correct steering geometry after installing a lift.
Apoc Ram 2500 Adjustable Radius arms are a significant upgrade from stock. Factory radius arms work great with factory-sized tires and suspension, but once you go bigger, you need more robust and longer control arms to maintain correct handling. Apoc adjustable radius supports proper suspension and steering geometry to keep your truck feeling like stock but better. When adding any amount of lift to a Ram 2500, you change your caster angles which can create dangerous steering symptoms and make it harder to maintain proper wheel tracking, which can cause your vehicle to wander between the lines easier. Big tires and lifts look great, but don't sacrifice handling and create a beast to keep on the road. Upgrade your control arms and drive with ease. Apoc Industries radius arms are fully adjustable from 2 inches of lift to 10" of lift, so if you're starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.
Parts Included:
- Two radius arms with DOM main tube for increased strength
- Alignment cam bolt for easy adjustments.
- Grease-able flex joint for long life.
Install Time:
- 3-4 Hours
- Basic hand tools
- Jack and Jack stand.
Radius Arm length
If upgrading from factory radius arms, ensure you set the length to the correct lift size to keep your steering geometry accurate. The larger the lift, the longer the control arms. Don't assume your lift size; if unsure, contact the lift kit manufacturer to verify your size. The Instructions will give you the measurements to set each control arm to match your lift; an alignment is recommended after installation to ensure proper alignment angles.
Fitment
Shipping
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1 business day. |
1973-1987 Chevrolet / GMC K10, K20 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/5/8" Main U-bolts
1980-1997 Ford F-250 / 350 Rear 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/Main U-bolts
1988-1998 Chevrolet / GMC C1500 K1500 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/Main U-bolts
1990-1995 Toyota 4 Runner 2nd gen Adjustable Trailing Arms
Hardware Kit/Adjustable Track Bar
1994-1999 Dodge Ram 1500 / 2500 / 3500 4wd HIGH Clearance Adjustable Control Arms
Hardware Kit With cam bolts
1994-1999 Dodge Ram 1500/ 2500 / 3500 4wd Long Arm Upgrade Kit
Hardware Kit for Axle side with Cam bolt.
1994-2002 Dodge Ram 2500 / 3500 Fabricated 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/9/16" Main U-bolts
1994-2013 Dodge Ram 1500/ 2500 / 3500 4wd CNC Long Arm Conversion upgrade Kit
Finish/Please choose your year range./Hardware Kit for Axle side with Cam bolt.
1973-1987 Chevrolet / GMC K10, K20 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/5/8" Main U-bolts
1980-1997 Ford F-250 / 350 Rear 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/Main U-bolts