Apoc Toyota FJ Cruiser adjustable trailing arms are a great upgrade from stock, factory controls arms work great with factory sized tires and suspension but once you go bigger you need stronger and longer controls arms to maintain correct handling. Apoc Toyota FJ Cruiser trailing arms are built to maintain proper suspension geometry to keep your rig handling like stock but better. When adding any amount of lift to your Toyota FJ Cruiser you change your drive line angles which can create drive line vibrations and u-joint failure. Big tires and big lifts look great, but don't sacrifice reliability, upgrade you control arms and drive with ease. Adjustable Controls arms are fully adjustable from stock all the way to 6" of lift, so if your just starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.

Parts Included:

2 Upper Control Arms
2 Lower Control Arms
Top Quality Polyurethane Bushings
Bushing Ends DOM Tubing
Uses Factory Hardware
Grease Fitting For Each Bushing For Long Life

Install Time:

3-4 Hours
Basic hand tools
Jack and Jack stands

Control Arm lengths

If you are upgrading from factory control arms make sure you set the length to the correct lift size to keep your steering geometry correct. The larger the lift the longer the control arms. Don't assume what your lift size is, if you are not sure contact the lift kit manufacture to verify your lift size. The Instructions will give you the measurements to set each control arm to match your lift, an alignment is recommended after install to insure all alignment angle are proper.