Must have 4" of lift

This 4-link kit for Dodge Ram 2500 CNC 4-12" Lift requires at least 4" of lift for installation. No welding is necessary, with just minimal drilling. It allows easy adjustment to caster angle and axle centering in fenders, helping to reduce/prevent tire rubbing during turns. Lower control arms feature cam bolt-style adjustments for easy alignment angle changes. Apoc Ram four-link kits are far superior to stock and suitable for 4-10" lifts, so upgrading later is doable. Upgrading control arms prevents dangerous steering symptoms, providing peace-of-mind on-road. Don't settle for poor handling; secure superior suspension and steering geometry with this 4-link kit.

 

Parts Included:

• 2 Upper Control Arms
• 2 Lower Control Arms
• 4 Link Conversion Bracket
• Top Quality Polyurethane Bushings
• Bushing Ends DOM Tubing 
• Uses Mostly Factory Hardware
• Grease Fitting For Each Bushing For Long Life

Install Time:

• 3-4 Hours
• Basic hand tools
• Jack and Jack stands

 

Control Arm lengths 

 

Ensure your steering geometry is correct when upgrading from factory control arms by setting the length to the corresponding lift size. Remember that the lift size determines the length of control arms. If unsure, consult the lift kit manufacturer for clarification. The instructions will provide the measurements for each control arm to match the lift, followed by an alignment to ensure accurate alignment angles.