If you need serious lift blocks for your Chevy Silverado or GMC Sierra 2500, Apoc Industries fabricated lift blocks have you covered. Our lift blocks offer insane strength but also look good doing it. Why lift your Chevy or GMC truck with weak cast lift blocks when you can get the lift you want but also look amazing? Our fabricated lift blocks are made from 1/4" steel, pressure bent to add incredible strength, and powder coated to look good for the long haul. Apoc's tapered design helps to reduce axle wrap when putting massive torque to the ground, along with an actual spring width block to match your leaf springs. We do not offer U bolts at this time. 

Features

SOLD IN PAIRS

Features

• 3" Wide
• Heavy Duty Lift blocks are fully welded and powder coated
• Made from 1/4" steel
• Multiple leaf spring centering pin mounting locations to center axle in the fender.
• Pressure bent center support to increase strength
• Powder-coated satin black.
• 3 degrees of taper to maintain proper pinion angle.

Optional Choices (does not come with unless added)

Anti Wrap u-bolts can be added to your blocks. The small hole on each corner of the lift block is for the anti wraps u-bolts; they add additional support by clamping around the leaf spring at the widest part of the block to help reduce the leaf spring from twisting.

3/4" Main U-bolts can also be added. These U-bolts will go over the Leaf spring alongside the lift blocks and under the axle to hold the rear axle to the truck. these will come in 14", 16", or 18", depending on the block size you choose.

Installation

• Method to raise and support vehicle weight off of the rear axle.
• Large breaker bar and socket 
• Torque Wrench

Install Time

• 2.5 hours
• Easy to moderate install (rusty U-bolts can cause the removal of original U-bolts hard.)
• Install Instructions

 In need of some severe duty lift blocks for your Chevy Silverado GMC Sierra 2500, Apoc Industries fabricated lift blocks have you covered. Our lift blocks offer insane strength but also look good doing it. Why lift your Chevy GMC truck with weak cast lift blocks when you can get the lift you want but also look amazing? Our fabricated lift blocks are made from 1/4" steel and pressure bent to add incredible strength and powder coated to look good for the long haul. Apoc's tapered design helps to reduce axle wrap when putting massive torque to the ground, along with an actual spring width block to match your leaf springs.  We do not offer U bolts at this time.