Fully adjustable from stock to 7" of drop

Apoc rear adjustable control arms are a significant upgrade from stock; factory controls arms work great with factory-sized tires and suspension. Once you go lower, you need more robust and longer control arms to maintain correct handling. Apoc Ram control arms are built to allow proper rear pinion and driveshaft angles to ensure your u-joints are happy and control wheel hops under load. When adding any drop to a Ram, you change your driveline angles, which can create premature U-Joint failure and driveline vibrations; adjustable rear control arms will help reduce or eliminate these issues. Big tires and lifts look great but don't sacrifice handling and reliability. Adjustable Controls arms are fully adjustable from stock to 7" of drop, so if you're starting with a mild kit for now but upgrading later, these arms will suit your needs as you add more drop over time.

Parts Included:

• 2 Upper Control Arms
• 2 Lower Control Arms
• Top Quality Polyurethane Bushings
• .250 Wall Tubing
• Bushing Ends DOM Tubing 
• Uses Factory Hardware
• Grease Fitting For Each Bushing For Long Life

Install Time:

• 3-4 Hours
• Basic hand tools
• Jack and Jack stands

 Install Instructions

Control Arm lengths 

If upgrading from factory control arms, ensure you set the length to the correct drop size to keep your pinion accurate. The larger the drop, the longer the control arms. Don't assume your drop size; if unsure, contact the kit manufacturer to verify your drop size. The Instructions will give you the measurements to set each control arm to match your drop; an alignment is recommended after installation to ensure all alignment angles are proper.