FULLY ADJUSTABLE FROM STOCK HEIGHT TO 6 INCHES OF LIFT

Apoc Dodge Ram adjustable controls arms are a significant upgrade from stock; factory controls arms work great with factory-sized tires and suspension. Once you go bigger, you need more robust and longer controls arms to maintain correct handling. Apoc Dodge control arms are built to maintain proper suspension and steering geometry to keep your truck feeling like stock but better. When adding any amount of lift to a Dodge Ram you change your caster angles which can create dangerous steering symptoms and harder to maintain proper wheel tracking which can cause your vehicle to wander between the lines easier. Big tires and big lifts look great but don't sacrifice handling and create a beast to keep on the road upgrade your control arm and drive with ease. Adjustable Controls arms are fully adjustable from stock all the way to 6" of lift, so if you're just starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.

Parts Included:

• 2 Upper Control Arms
• 2 Lower Control Arms
• Top Quality Polyurethane Bushings
• .250 Wall Tubing
• Bushing Ends DOM Tubing 
• Uses Factory Hardware
• Grease Fitting For Each Bushing For Long Life

Install Time:

• 3-4 Hours
• Basic hand tools
• Jack and Jack stands

 Control Arm lengths 

If you are upgrading from factory control arms make sure you set the length to the correct lift size to keep your steering geometry correct. The larger the lift the longer the control arms. Don't assume what your lift size is, if you are not sure contact the lift kit manufacturer to verify your lift size. The Instructions will give you the measurements to set each control arm to match your lift, an alignment is recommended after installation to ensure all alignment angles are proper.