MUST HAVE AT LEAST 4 INCHES OF LIFT TO USE THIS LONG ARM upgrade KIT

 To be used from 4" to 12" of lift.

No welding required minor drilling only.

The Dodge Ram long kit allows adjustments to a caster angle and axle centering in fender wells. Adjustable control arms allow you to center the axle back to the stock location, which helps to reduce or stop tire rubbing when turning. The lower long control arms still utilize factory cam bolt style adjustments for easier alignment angle adjustments.

Apoc Dodge Ram long-arm conversion upgrade kits are a significant upgrade from stock. Factory control arms work great with factory-sized tires and suspension, but you need more robust and longer control arms to maintain correct handling once you go bigger. Apoc long arm kits are built to support proper suspension and steering geometry to keep your truck feeling like stock or better. When adding any lift to a Dodge Ram, you change your caster angles, creating dangerous steering symptoms and making it hard to control on the road. Big tires and lifts look great, but don't sacrifice handling and create a beast to keep on the road. Upgrade your control arms and drive with ease. Dodge Ram long arm kits are fully adjustable from 4 inches of lift to 12" of lift, so if you're starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.

Parts Included:

• 2 Upper Control Arms heavy wall tubing
• 2 Lower Control Arms heavy wall tubing
• Longarm Conversion Bracket
• Top Quality Polyurethane Bushings
• Bushing Ends DOM Tubing 
• Grease Fitting For Each Bushing For Long Life

Install Time:

• 6-8 Hours
• Basic hand tools
• Jack and Jack stands

 Install Instructions

Control Arm lengths 

If upgrading from factory control arms, e you set the length to the correct lift size to keep your steering geometry accurate. The larger the lift, the longer the control arms. Don't assume your lift size; if unsure, contact the lift kit manufacturer to verify your lift size. The Instructions will give you the measurements to set each control arm to match your lift; an alignment is recommended after installation to ensure proper alignment angles.