Apoc Jeep Grand Cherokee rear adjustable controls arms are a great upgrade from stock, factory controls arms work great with factory sized tires and suspension but once you go bigger you need stronger and longer controls arms to maintain correct Pinion angle. Apoc Jeep Grand Cherokee rear control arms are built to maintain proper suspension and drive line geometry to keep your trig handling like stock but better. When adding any amount of lift to your Jeep Wrangler you change your drive line angles which can create vibration and premature u joint failure. Big tires and big lifts look great, but don't sacrifice reliability for looks, upgrade you control arms and drive with ease. Adjustable Controls arms are fully adjustable from stock all the way to 5" of lift, so if your just starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.

Parts Included:

• 2 Upper Rear Control Arms
• 2 Lower Rear Control Arms
• Top Quality Polyurethane Bushings
• .120 Wall Tubing
• Bushing Ends DOM Tubing 
• Uses Factory Hardware
• Grease Fitting For Each Bushing For Long Life

Install Time:

• 3-4 Hours
• Basic hand tools
• Jack and Jack stands

Control Arm lengths 

If you are upgrading from factory control arms make sure you set the length to the correct lift size to keep your steering geometry correct. The larger the lift the longer the control arms. Don't assume what your lift size is, if you are not sure contact the lift kit manufacture to verify your lift size. The Instructions will give you the measurements to set each control arm to match your lift, an alignment is recommended after install to insure all alignment angle are proper.